
Repairing, washing or assessing damage to a container inside a port area is not work for just any workshop. If your contractor has no valid licence, or their licence has been suspended, the safety risk and the cost of any damage dispute stay with you.
The legal framework for these services
The regulation on licensing and supervising container technical support service companies was approved by the Supreme Council of the Ports and Maritime Organization on 7 Khordad 1391 (Iranian calendar). Under it, nobody may provide these services inside port areas without the organisation's licence. The scope of work for these companies is clearly defined: repair, refurbishment, damage estimation and assessment, container conversion (a change of design), washing and degassing.
Technical basis. All of this work must comply with the International Convention for Safe Containers (CSC) and the International Maritime Dangerous Goods Code (IMDG Code). For a container that has carried dangerous cargo, degassing and washing are a safety requirement, not a cosmetic job.
Your checklist before signing the contract
1. Licence validity. A licence is valid for four years, and renewal depends on the company proving again that it meets the conditions. Check the date of issue. If a company has had no activity for four consecutive years, the organisation will not renew its licence.
2. A workshop in the same port. The company must have its own head office with office use, and a separate workshop in every port where it works. That workshop must have the minimum repair and measuring equipment set out in the CSC, and a quality control unit based on site.
3. Insurance and guarantee. The regulation requires the company to insure its staff and its liability, and to lodge a guarantee of fifty million rials with the organisation to cover possible damage at the quay and in port yards. That sum is small, so ask separately about the company's liability insurance limit.
4. An approved inspector. To meet the CSC and IMDG Code requirements, the company must use the services of a Classification Society or an inspector approved by the organisation. Ask for the name of that body to appear in the repair report or damage assessment.
5. Letterhead and authorised signatures. The company must state its container technical support activity on its letterhead, and must have formally notified the organisation of its authorised signatories. An invoice or report without an authorised signatory is usually not treated as solid evidence in a later dispute.
Contact Pooria Adli:+98 912 533 7809pooria.adli@shipomarket.com
